FG101-16

FG-101 Soldering Iron Tester (°Celsius)

This part number has been replaced by FG101B-03.

The HAKKO FG-101 Soldering Tester measures tip temperature, leak voltage, and tip-to-ground resistance. Leak voltage and tip-to-ground resistance can be easily measured due to automatic self-correction of the zero point.

• Resistant to drift and ambient temperature variations.

• Highly reliable and accurate measurements.

• MAX HOLD function displays maximum value when MAX HOLD button is pressed.

• Suitable for Lead-Free solder applications.

• Measures in degrees Celsius.

NOTE: Leak voltage is that potential resulting from the small current ‘leaking’ from the tip of a soldering iron, even though the tip may be grounded. This current can damage sensitive components. The HAKKO FG-101 provides a quick and accurate means of measuring this leak voltage.

Part Number FG101-16 Temperature   Resolution 1°C   Measurement range 0° — 700°C   Precision ±3°C (300° — 600°C) ±5°C outside of above range   Sensor K(CA) thermocouple Voltage   Resolution 0.1mV   Measurement range 0-40mV (AC)   Precision ± (5% + 1 digit) Resistance   Resolution 0.1 ohms   Measurement range 0-40 ohms   Precision ± (5% + 1 digit) Display   Liquid Crystal Display 3.5 digits   Burnout -/   MAX HOLD Refer to manual Monitor Output   Temperature 1mV/°C, °F   Voltage 10mV/mV   Resistance 10mV/ohm   Burn out -7V (MAX.) Power Consumption 120V/2W Dimensions 200(W) x 50(H) x 120(D) mm (7.9[W] x 2.0[H] x 4.7[D] in.) Weight 1 kg (2.2 lbs.) Operation Environment 32°F - 104°F  20% - 90% RH APPROVED CONTENTS Part Number Description Model Name FG-101 Soldering Tester B1752 Conduction plate B1754 Ground clip B1950 Conduction wire 191-212 Sensor 10 pcs B2419 Power cord ACCESSORIES Part Number Description A1310 Temperature probe for soldering pot B2468 Fuse / 125V-5A 191-212 Sensor 10 pcs