Selected Items (0)

Facebook Share Button Twitter Share Button

Search


Show results in new page:

Hours:
Mon - Thur
8am - 4:30pm ET
kem-tron logo
Electronic Manufacturing Distribution Since 1989
Holiday Closures:
Dec 25-26 and Jan 1


EDU2AE-HPro
EDU2AE-HPro EDU2AE/HP with additional I/O & serial port
In Stock: 0 (Available To Order)
Price: Request Quote
Add to order/quote

EDU2AE-HPro



Control Unit

The High Proformace version of the EDU2AE offers twelve (12) additional paramaters for addtional process control and information.

The HP version displayes a torque value that is calibrated back to a offline Transducer. Limits can be set around the displayed torque value to indicate pass/fail situations. The unit includes the ability to run at the full torque of the tool for a controlled amount of time to overcome high prevailing torque in thread cutting applications. It is password protected which the EDU2AE is not. And, the EDU2AE/HP can screw and batch count.

The EDU2AE/HPro adds to the EDU2AE/HP with:

- 10 Pin I/O connector for lever signal, screw ok,, error message, stop motor, reverse & start signals
- RS232 Serial port
- 8 Pin I/O connector for program end, motor on, external reset, external ok, external escape, missing piece (photo eye)

EDU2AE user definable parameters:

  1. Driver Model
  2. Torque level adjustment: 2.6 to 442 in-lbs (tool dependent)
  3. Joint type (HARD or SOFT) selects RPM profile
  4. Break Time: down shift speed from pre-torque to final toque when in the Hard Joint RPM profile
  5. Ramp Time: select from 0.2 to 3.0 Seconds
  6. Speed: tool dependent
  7. Minimum Time: select from 0.1s to MAX - 0.1s. Torque reached before this time will not activate torque output signal.
  8. Maximum Time: select from MIN + 0.1 s to 20 sec. If torque is not reached before the MAX time the screwdriver will stop and an error message will be displayed.
  9. Auto Reverse
  10. Reverse Speed
  11. Reverse Torque:
  12. Language: English, Italian, German, Spanish.

Addtional EDU2AE/HP user definable parameters:

  1. Thread Cutting, Programmable in 1/2 second.
  2. Rotations: Left or Right
  3. Change Password
  4. Password: On or Off
  5. Calibration
  6. Compensation
  7. Unit: In/lbs or Nm
  8. Torque: Min Setting
  9. Torque: MaxSetting
  10. Number of Screws
  11. OK/ESC
  12. Number of Cycles

Items that ship with this unit:

  • 110V AC power cord

Details & Specifications


Torque Range: 2.6 - 442 in-lbs (Tool dependent)
RPM Range: 40 - 1200 rpm (tool dependent)
Voltage: 110V
Dimensions: 196x170xh10 mm
Weight: 8 lbs
Repeatability: Joint / profile dependent
Accuracy: Joint / profile dependent
Time Control: Standard
RPM Control: Standard
Current Control: Yes
Screw Counting: Standard
Parameter Sets: 1
Torque Settings: 1
Torque Control: Must be calibrated