{"title":"Anti-Static Coatings and Sprays","description":"\u003cp\u003eShop anti-static coatings, sprays, and floor finishes for electronics manufacturing environments at KEM-TRON. ACL Staticide formulations reduce static charge on floors, mats, workbenches, and equipment surfaces to maintain ESD-safe conditions. \u003ca href=\"https:\/\/kem-tron.com\/pages\/anti-static-coatings-sprays-how-to-choose\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAnti-static coatings guide →\u003c\/a\u003e  |  \u003ca href=\"https:\/\/kem-tron.com\/pages\/electronics-cleaning-chemicals-flux-removers-degreasers-guide\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eElectronics cleaning guide →\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"staticide®-530-general-purpose-anti-static-4-oz-bottle-with-fingertip-spray","title":"ACL Staticide® 530 General Purpose Anti-Static, 4 oz. bottle with fingertip spray","description":"\u003ch3\u003eACL Staticide® 530 General Purpose Anti-Static, 4 oz. bottle with fingertip spray\u003c\/h3\u003e\u003ch4\u003eStatic control for all surfaces\u003c\/h4\u003e\u003cp\u003eStaticide® General Purpose anti-static topical is easy to use and highly effective in preventing the build up of electrostatic charge, known as tribogeneration, in industrial manufacturing and static-sensitive environments. A key component in any static control program, this ready-to-use solution formulated specifically for non-porous surfaces is non-toxic, non-flammable, and non-staining. With a similar viscosity to water, it can be applied in many ways including spraying, wiping, or dipping. Staticide® General Purpose can be used for revitalizing anti-static mats that have lost their dissipative properties, cleaning vinyl records, and when applied to packaging material, can be classified as low charging packaging material as described in ANSI\/ESD S541-2019 when tested according to ESD ADV11.21.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for non-porous surfaces\u003c\/li\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than 2 seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e9 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eOne gallon covers approximately 2000 sqft\u003c\/li\u003e\n\u003cli\u003eLasts from weeks to months depending on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900039065894,"sku":"530","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-2001-2-general-purpose-anti-static-50-gallon-drum-3240344.png?v=1775074335"},{"product_id":"staticide®-2001-general-purpose-anti-static-gallon","title":"ACL Staticide® 2001 General Purpose Anti-Static, Gallon","description":"\u003ch3\u003eACL Staticide® 2001 General Purpose Anti-Static, Gallon\u003c\/h3\u003e\u003ch4\u003eStatic control for all surfaces\u003c\/h4\u003e\u003cp\u003eStaticide® General Purpose anti-static topical is easy to use and highly effective in preventing the build up of electrostatic charge, known as tribogeneration, in industrial manufacturing and static-sensitive environments. A key component in any static control program, this ready-to-use solution formulated specifically for non-porous surfaces is non-toxic, non-flammable, and non-staining. With a similar viscosity to water, it can be applied in many ways including spraying, wiping, or dipping. Staticide® General Purpose can be used for revitalizing anti-static mats that have lost their dissipative properties, cleaning vinyl records, and when applied to packaging material, can be classified as low charging packaging material as described in ANSI\/ESD S541-2019 when tested according to ESD ADV11.21.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for non-porous surfaces\u003c\/li\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than 2 seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e9 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eOne gallon covers approximately 2000 sqft\u003c\/li\u003e\n\u003cli\u003eLasts from weeks to months depending on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900039655718,"sku":"2001","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-2001-general-purpose-anti-static-gallon-8399347.png?v=1775074514"},{"product_id":"staticide®-2002-heavy-duty-anti-static-gallon","title":"ACL Staticide® 2002 Heavy Duty Anti-Static, Gallon","description":"\u003ch3\u003eACL Staticide® 2002 Heavy Duty Anti-Static, Gallon\u003c\/h3\u003e\u003ch4\u003eEliminate Static on Carpets, Upholstery, \u0026amp; Fabrics\u003c\/h4\u003e\u003cp\u003eStaticide® Heavy Duty is an easy to use topical antistatic coating that's highly effective at eliminating static and preventing tribogeneration in industrial manufacturing and other static sensitive environments. Originally designed for porous surfaces such as carpets, upholstery, and fabrics, it's also appropriate for use in avoiding jamming or material slippage during printing, packaging, and converting. This solution can even be used as an aid to avert dangerous static ignition of combustible vapors, dust, or solvents. A key component in any static control program, Staticide® Heavy Duty is non-toxic, non-flammable, and non-staining. When properly used and applied, Staticide® can be considered and classified as low charging according to the low charging packaging material properties described in ANSI\/ESD S541-2019 when tested according to ESD ADV11.21.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for porous surfaces\u003c\/li\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than 2 seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10^9 - 10^10 ohms\u003c\/li\u003e\n\u003cli\u003eCovers approximately 2000 sq.ft. per gallon\u003c\/li\u003e\n\u003cli\u003eLasts from weeks to months depending on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900039754022,"sku":"2002","price":47.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-2002-5-heavy-duty-anti-static-5-gallon-pail-2962719.png?v=1775074335"},{"product_id":"staticide®-2003-general-purpose-anti-static-quart-with-trigger-spray","title":"ACL Staticide® 2003 General Purpose Anti-Static, Quart with trigger spray","description":"\u003ch3\u003eACL Staticide® 2003 General Purpose Anti-Static, Quart with trigger spray\u003c\/h3\u003e\u003ch4\u003eStatic control for all surfaces\u003c\/h4\u003e\u003cp\u003eStaticide® General Purpose anti-static topical is easy to use and highly effective in preventing the build up of electrostatic charge, known as tribogeneration, in industrial manufacturing and static-sensitive environments. A key component in any static control program, this ready-to-use solution formulated specifically for non-porous surfaces is non-toxic, non-flammable, and non-staining. With a similar viscosity to water, it can be applied in many ways including spraying, wiping, or dipping. Staticide® General Purpose can be used for revitalizing anti-static mats that have lost their dissipative properties, cleaning vinyl records, and when applied to packaging material, can be classified as low charging packaging material as described in ANSI\/ESD S541-2019 when tested according to ESD ADV11.21.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for non-porous surfaces\u003c\/li\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than 2 seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e9 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eOne gallon covers approximately 2000 sqft\u003c\/li\u003e\n\u003cli\u003eLasts from weeks to months depending on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900039786790,"sku":"2003","price":9.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-2003-general-purpose-anti-static-quart-with-trigger-spray-9288953.png?v=1775074513"},{"product_id":"staticide®-2005-heavy-duty-anti-static-quart-with-trigger-spray","title":"ACL Staticide® 2005 Heavy Duty Anti-Static, Quart with trigger spray","description":"\u003ch3\u003eACL Staticide® 2005 Heavy Duty Anti-Static, Quart with trigger spray\u003c\/h3\u003e\u003ch4\u003eEliminate Static on Carpets, Upholstery, \u0026amp; Fabrics\u003c\/h4\u003e\u003cp\u003eStaticide® Heavy Duty is an easy to use topical antistatic coating that's highly effective at eliminating static and preventing tribogeneration in industrial manufacturing and other static sensitive environments. Originally designed for porous surfaces such as carpets, upholstery, and fabrics, it's also appropriate for use in avoiding jamming or material slippage during printing, packaging, and converting. This solution can even be used as an aid to avert dangerous static ignition of combustible vapors, dust, or solvents. A key component in any static control program, Staticide® Heavy Duty is non-toxic, non-flammable, and non-staining. When properly used and applied, Staticide® can be considered and classified as low charging according to the low charging packaging material properties described in ANSI\/ESD S541-2019 when tested according to ESD ADV11.21.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for porous surfaces\u003c\/li\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than 2 seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10^9 - 10^10 ohms\u003c\/li\u003e\n\u003cli\u003eCovers approximately 2000 sq.ft. per gallon\u003c\/li\u003e\n\u003cli\u003eLasts from weeks to months depending on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900040081702,"sku":"2005","price":13.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-2002-5-heavy-duty-anti-static-5-gallon-pail-2962719.png?v=1775074335"},{"product_id":"staticide®-2006-static-sentry-anti-static-aerosol-12-oz-340-g-aerosol-can","title":"ACL Staticide® 2006 Static Sentry Anti-Static Aerosol, 12 oz \/ 340 g Aerosol Can","description":"\u003ch3\u003eACL Staticide® 2006 Static Sentry Anti-Static Aerosol, 12 oz \/ 340 g Aerosol Can\u003c\/h3\u003e\u003ch4\u003eProven anti-stat in a convienent aerosol can\u003c\/h4\u003e\u003cp\u003eFor decades, people have relied on ACL Staticide® topical anti-stats for maximum control of static electricity in the office, laboratories, institutions, and manufacturing. Staticide® 2006 Static Sentry puts the same Staticide® formula in an aerosol can for convenient and easy application. Staticide® 2006 Static Sentry is ideal for eliminating charge generation on both porous and non-porous materials. Inhibiting tribogeneration has a multitude of benefits including minimizing system errors and downtime for machinery, preventing dust attraction, and removing static on garments. Packaged in a special aerosol can, Staticide® 2006 Static Sentry can operate at different angles to allow for horizontal spraying.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEliminates static charge in less than 2 seconds, humidity independent\u003c\/li\u003e\n\u003cli\u003eResistance: 10^9 - 10^10 ohms\u003c\/li\u003e\n\u003cli\u003eExceeds MIL-B-81705 specifications according to Federal Test Standard 101, method 4046\u003c\/li\u003e\n\u003cli\u003eOzone safe\u003c\/li\u003e\n\u003cli\u003eRoHS, REACH compliant\u003c\/li\u003e\n\u003cli\u003eNo tribocharging; prevents dust attraction\u003c\/li\u003e\n\u003cli\u003eSafe to use on plastics and fabrics\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900040212774,"sku":"2006","price":12.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-2006-static-sentry-anti-static-aerosol-12-oz-340-g-aerosol-can-9277988.png?v=1775074514"},{"product_id":"staticide®-2450-anti-static-wipes-5-x-8-bulk-450-wipes-per-case","title":"ACL Staticide® 2450 Anti-Static Wipes, 5\" x 8\", Bulk 450 wipes per case","description":"\u003ch3\u003eACL Staticide® 2450 Anti-Static Wipes, 5\" x 8\", Bulk 450 wipes per case\u003c\/h3\u003e\u003ch4\u003eOne-step solution for cleaning and static control\u003c\/h4\u003e\u003cp\u003eStaticide® SW12 Anti-Static Wipes are the ideal anti-static applicator for keeping electronics and equipment clean and static-free. They have the same time-tested anti-static formula as our Staticide® topical liquids, but in a convenient, one-step cleaning and static control solution.Staticide® SW12 Anti-Static Wipes are safe to use around sensitive electronics for preventing dust attraction and buildup. Use on the cases of computers and laptops, not for use on screens. Staticide® SW12 wipes can also be used on industrial machinery and parts, and are great for use in tight spaces such as keyboards. When properly applied, a material coated in Staticide can be classified as low charging according to the low charging packaging material properties described in ANSI\/ESD S541-2019 when tested according to ESD ADV11.21. For more information, please see Staticide® General Purpose.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eQuick dry time\u003c\/li\u003e\n\u003cli\u003eLong-lasting\u003c\/li\u003e\n\u003cli\u003eNon-toxic\u003c\/li\u003e\n\u003cli\u003ePrevents dust attraction\u003c\/li\u003e\n\u003cli\u003eSize: 5” x 8”\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900040245542,"sku":"2450","price":91.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-sw12-anti-static-wipes-5-x-8-24-wipes-per-box-5206384.png?v=1775073968"},{"product_id":"staticide®-63001-esd-safety-shield-dissipative-coating-for-most-surfaces-gallon","title":"ACL Staticide® 63001 ESD Safety Shield Dissipative Coating for Most Surfaces, Gallon","description":"\u003ch3\u003eACL Staticide® 63001 ESD Safety Shield Dissipative Coating for Most Surfaces, Gallon\u003c\/h3\u003e\u003ch4\u003eAdvanced Dissipative Static Control\u003c\/h4\u003e\u003cp\u003eStaticide® ESD Safety Shield is made of a proprietary blend of conducting polymers, making the coating inherently dissipative regardless of ambient relative humidity. Available in liquid and in a convenient aerosol spray, Staticide® ESD Safety Shield is suitable for use in ESD controlled environments where contamination is a concern and anywhere static interferes with production assembly. This durable polymer formula provides dependable protection by allowing static to dissipate safely without wearing off or losing resistivity, unlike surfactants. Staticide® ESD Safety Shield coating can be cured at ambient temperatures or accelerated with low heat. Intended for indoor use, Staticide® ESD Safety Shield is a simple to use, one-part, water-based system, ideal for plastic parts and packaging, electronic housings, conveyor parts, bins, shelving, on objects in electronic assembly work areas and is flexile enough for soft plastics like tubing, clamshell protective packaging, carrying trays, and lids, and more to prevent static buildup and maintain ESD safety. Whether applied by spraying, flow coat, dipping, or foam brush, the coating will be translucent without appearing \"milky\" and will adhere to many plastics without any specialty cure or treatment, and without chipping or peeling. Staticide® ESD Safety Shield's low V.O.C. formulation will not outgas once completely cured. It is RoHS compliant and meets ANSI\/ESD S20.20 standards, and the aerosol can contains no CFCs.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSurface resistivity of 10e6 to 10e9 ohms\/sq. regardless of humidity\u003c\/li\u003e\n\u003cli\u003eWater-based acrylic coating\u003c\/li\u003e\n\u003cli\u003eTranslucent, not \"milky\" - 93-96% T measured by UV spectra\u003c\/li\u003e\n\u003cli\u003eAdheres to most plastics, glass, and metal\u003c\/li\u003e\n\u003cli\u003eCompliant with ANSI\/ESD S20.20 and MIL B-81705\u003c\/li\u003e\n\u003cli\u003eCan be applied via spray, flow coat, dipping, or foam brush\u003c\/li\u003e\n\u003cli\u003eAmbient cure\u003c\/li\u003e\n\u003cli\u003eRoHS and REACH compliant\u003c\/li\u003e\n\u003cli\u003eNo silicone, chlorides, other contaminants\u003c\/li\u003e\n\u003cli\u003eCoverage (flow coat) approx. 600 sqft \/ gallon @ 1.5 mil dry\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900043063590,"sku":"63001","price":446.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-6400q-esd-safety-shield-dissipative-coating-for-polypropylene-quart-9714898.png?v=1775074146"},{"product_id":"staticide®-63005-esd-safety-shield-dissipative-coating-for-most-surfaces-5-gallon-pail","title":"ACL Staticide® 63005 ESD Safety Shield Dissipative Coating for Most Surfaces, 5-gallon Pail","description":"\u003ch3\u003eACL Staticide® 63005 ESD Safety Shield Dissipative Coating for Most Surfaces, 5-gallon Pail\u003c\/h3\u003e\u003ch4\u003eAdvanced Dissipative Static Control\u003c\/h4\u003e\u003cp\u003eStaticide® ESD Safety Shield is made of a proprietary blend of conducting polymers, making the coating inherently dissipative regardless of ambient relative humidity. Available in liquid and in a convenient aerosol spray, Staticide® ESD Safety Shield is suitable for use in ESD controlled environments where contamination is a concern and anywhere static interferes with production assembly. This durable polymer formula provides dependable protection by allowing static to dissipate safely without wearing off or losing resistivity, unlike surfactants. Staticide® ESD Safety Shield coating can be cured at ambient temperatures or accelerated with low heat. Intended for indoor use, Staticide® ESD Safety Shield is a simple to use, one-part, water-based system, ideal for plastic parts and packaging, electronic housings, conveyor parts, bins, shelving, on objects in electronic assembly work areas and is flexile enough for soft plastics like tubing, clamshell protective packaging, carrying trays, and lids, and more to prevent static buildup and maintain ESD safety. Whether applied by spraying, flow coat, dipping, or foam brush, the coating will be translucent without appearing \"milky\" and will adhere to many plastics without any specialty cure or treatment, and without chipping or peeling. Staticide® ESD Safety Shield's low V.O.C. formulation will not outgas once completely cured. It is RoHS compliant and meets ANSI\/ESD S20.20 standards, and the aerosol can contains no CFCs.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSurface resistivity of 10e6 to 10e9 ohms\/sq. regardless of humidity\u003c\/li\u003e\n\u003cli\u003eWater-based acrylic coating\u003c\/li\u003e\n\u003cli\u003eTranslucent, not \"milky\" - 93-96% T measured by UV spectra\u003c\/li\u003e\n\u003cli\u003eAdheres to most plastics, glass, and metal\u003c\/li\u003e\n\u003cli\u003eCompliant with ANSI\/ESD S20.20 and MIL B-81705\u003c\/li\u003e\n\u003cli\u003eCan be applied via spray, flow coat, dipping, or foam brush\u003c\/li\u003e\n\u003cli\u003eAmbient cure\u003c\/li\u003e\n\u003cli\u003eRoHS and REACH compliant\u003c\/li\u003e\n\u003cli\u003eNo silicone, chlorides, other contaminants\u003c\/li\u003e\n\u003cli\u003eCoverage (flow coat) approx. 600 sqft \/ gallon @ 1.5 mil dry\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900043096358,"sku":"63005","price":2173.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-6400q-esd-safety-shield-dissipative-coating-for-polypropylene-quart-9714898.png?v=1775074146"},{"product_id":"staticide®-64001-esd-safety-shield-dissipative-coating-for-polypropylene-gallon","title":"ACL Staticide® 64001 ESD Safety Shield Dissipative Coating for Polypropylene, Gallon","description":"\u003ch3\u003eACL Staticide® 64001 ESD Safety Shield Dissipative Coating for Polypropylene, Gallon\u003c\/h3\u003e\u003ch4\u003eAdvanced Dissipative Static Control\u003c\/h4\u003e\u003cp\u003eStaticide® ESD Safety Shield is made of a proprietary blend of conducting polymers, making the coating inherently dissipative regardless of ambient relative humidity. Available in liquid, Staticide® ESD Safety Shield is suitable for use in ESD controlled environments where contamination is a concern and anywhere static interferes with production assembly. This durable polymer formula provides dependable protection by allowing static to dissipate safely without wearing off or losing resistivity, unlike surfactants. Staticide® ESD Safety Shield coating can be cured at ambient temperatures or accelerated with low heat. Intended for indoor use, Staticide® ESD Safety Shield is a simple to use, one-part, water-based system, ideal for plastic parts and packaging, electronic housings, conveyor parts, bins, shelving, on objects in electronic assembly work areas and is flexile enough for soft plastics like tubing, clamshell protective packaging, carrying trays, and lids, and more to prevent static buildup and maintain ESD safety. Whether applied by spraying, flow coat, dipping, or foam brush, the coating will be translucent without appearing \"milky\" and will adhere to many plastics without any specialty cure or treatment, and without chipping or peeling. Staticide® ESD Safety Shield's low V.O.C. formulation will not outgas once completely cured. It is RoHS compliant and meets ANSI\/ESD S20.20 standards, and the aerosol contains no CFCs.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for superior adhesion to polypropylene\u003c\/li\u003e\n\u003cli\u003eSurface resistivity of 10e6 to 10e9 ohms\/sq. regardless of humidity\u003c\/li\u003e\n\u003cli\u003eWater-based acrylic coating\u003c\/li\u003e\n\u003cli\u003eTranslucent, not \"milky\" - 93-96% T measured by UV spectra\u003c\/li\u003e\n\u003cli\u003eCompliant with ANSI\/ESD S20.20 and MIL B-81705\u003c\/li\u003e\n\u003cli\u003eCan be applied via spray, flow coat, dipping, or foam brush\u003c\/li\u003e\n\u003cli\u003eAmbient cure\u003c\/li\u003e\n\u003cli\u003eRoHS and REACH compliant\u003c\/li\u003e\n\u003cli\u003eNo silicone, chlorides, other contaminants\u003c\/li\u003e\n\u003cli\u003eCoverage (flow coat) approx. 600 sqft \/ gallon @ 1.5 mil dry\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900043129126,"sku":"64001","price":540.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-6400q-esd-safety-shield-dissipative-coating-for-polypropylene-quart-9714898.png?v=1775074146"},{"product_id":"staticide®-64005-esd-safety-shield-dissipative-coating-for-polypropylene-5-gallon-pail","title":"ACL Staticide® 64005 ESD Safety Shield Dissipative Coating for Polypropylene, 5-gallon Pail","description":"\u003ch3\u003eACL Staticide® 64005 ESD Safety Shield Dissipative Coating for Polypropylene, 5-gallon Pail\u003c\/h3\u003e\u003ch4\u003eAdvanced Dissipative Static Control\u003c\/h4\u003e\u003cp\u003eStaticide® ESD Safety Shield is made of a proprietary blend of conducting polymers, making the coating inherently dissipative regardless of ambient relative humidity. Available in liquid, Staticide® ESD Safety Shield is suitable for use in ESD controlled environments where contamination is a concern and anywhere static interferes with production assembly. This durable polymer formula provides dependable protection by allowing static to dissipate safely without wearing off or losing resistivity, unlike surfactants. Staticide® ESD Safety Shield coating can be cured at ambient temperatures or accelerated with low heat. Intended for indoor use, Staticide® ESD Safety Shield is a simple to use, one-part, water-based system, ideal for plastic parts and packaging, electronic housings, conveyor parts, bins, shelving, on objects in electronic assembly work areas and is flexile enough for soft plastics like tubing, clamshell protective packaging, carrying trays, and lids, and more to prevent static buildup and maintain ESD safety. Whether applied by spraying, flow coat, dipping, or foam brush, the coating will be translucent without appearing \"milky\" and will adhere to many plastics without any specialty cure or treatment, and without chipping or peeling. Staticide® ESD Safety Shield's low V.O.C. formulation will not outgas once completely cured. It is RoHS compliant and meets ANSI\/ESD S20.20 standards, and the aerosol contains no CFCs.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for superior adhesion to polypropylene\u003c\/li\u003e\n\u003cli\u003eSurface resistivity of 10e6 to 10e9 ohms\/sq. regardless of humidity\u003c\/li\u003e\n\u003cli\u003eWater-based acrylic coating\u003c\/li\u003e\n\u003cli\u003eTranslucent, not \"milky\" - 93-96% T measured by UV spectra\u003c\/li\u003e\n\u003cli\u003eCompliant with ANSI\/ESD S20.20 and MIL B-81705\u003c\/li\u003e\n\u003cli\u003eCan be applied via spray, flow coat, dipping, or foam brush\u003c\/li\u003e\n\u003cli\u003eAmbient cure\u003c\/li\u003e\n\u003cli\u003eRoHS and REACH compliant\u003c\/li\u003e\n\u003cli\u003eNo silicone, chlorides, other contaminants\u003c\/li\u003e\n\u003cli\u003eCoverage (flow coat) approx. 600 sqft \/ gallon @ 1.5 mil dry\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900043161894,"sku":"64005","price":2605.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-6400q-esd-safety-shield-dissipative-coating-for-polypropylene-quart-9714898.png?v=1775074146"},{"product_id":"staticide®-2001-2-general-purpose-anti-static-50-gallon-drum","title":"ACL Staticide® 2001-2 General Purpose Anti-Static, 50-gallon drum","description":"\u003ch3\u003eACL Staticide® 2001-2 General Purpose Anti-Static, 50-gallon drum\u003c\/h3\u003e\u003ch4\u003eStatic control for all surfaces\u003c\/h4\u003e\u003cp\u003eStaticide® General Purpose anti-static topical is easy to use and highly effective in preventing the build up of electrostatic charge, known as tribogeneration, in industrial manufacturing and static-sensitive environments. A key component in any static control program, this ready-to-use solution formulated specifically for non-porous surfaces is non-toxic, non-flammable, and non-staining. With a similar viscosity to water, it can be applied in many ways including spraying, wiping, or dipping. Staticide® General Purpose can be used for revitalizing anti-static mats that have lost their dissipative properties, cleaning vinyl records, and when applied to packaging material, can be classified as low charging packaging material as described in ANSI\/ESD S541-2019 when tested according to ESD ADV11.21.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for non-porous surfaces\u003c\/li\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than 2 seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e9 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eOne gallon covers approximately 2000 sqft\u003c\/li\u003e\n\u003cli\u003eLasts from weeks to months depending on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046405926,"sku":"2001-2","price":880.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-2001-2-general-purpose-anti-static-50-gallon-drum-3240344.png?v=1775074335"},{"product_id":"staticide®-2001-5-general-purpose-anti-static-5-gallon-pail","title":"ACL Staticide® 2001-5 General Purpose Anti-Static, 5-gallon pail","description":"\u003ch3\u003eACL Staticide® 2001-5 General Purpose Anti-Static, 5-gallon pail\u003c\/h3\u003e\u003ch4\u003eStatic control for all surfaces\u003c\/h4\u003e\u003cp\u003eStaticide® General Purpose anti-static topical is easy to use and highly effective in preventing the build up of electrostatic charge, known as tribogeneration, in industrial manufacturing and static-sensitive environments. A key component in any static control program, this ready-to-use solution formulated specifically for non-porous surfaces is non-toxic, non-flammable, and non-staining. With a similar viscosity to water, it can be applied in many ways including spraying, wiping, or dipping. Staticide® General Purpose can be used for revitalizing anti-static mats that have lost their dissipative properties, cleaning vinyl records, and when applied to packaging material, can be classified as low charging packaging material as described in ANSI\/ESD S541-2019 when tested according to ESD ADV11.21.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for non-porous surfaces\u003c\/li\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than 2 seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e9 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eOne gallon covers approximately 2000 sqft\u003c\/li\u003e\n\u003cli\u003eLasts from weeks to months depending on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046438694,"sku":"2001-5","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-2001-5-general-purpose-anti-static-5-gallon-pail-8686114.png?v=1775074335"},{"product_id":"staticide®-2002-2-heavy-duty-anti-static-50-gallon-drum","title":"ACL Staticide® 2002-2 Heavy Duty Anti-Static, 50-gallon drum","description":"\u003ch3\u003eACL Staticide® 2002-2 Heavy Duty Anti-Static, 50-gallon drum\u003c\/h3\u003e\u003ch4\u003eEliminate Static on Carpets, Upholstery, \u0026amp; Fabrics\u003c\/h4\u003e\u003cp\u003eStaticide® Heavy Duty is an easy to use topical antistatic coating that's highly effective at eliminating static and preventing tribogeneration in industrial manufacturing and other static sensitive environments. Originally designed for porous surfaces such as carpets, upholstery, and fabrics, it's also appropriate for use in avoiding jamming or material slippage during printing, packaging, and converting. This solution can even be used as an aid to avert dangerous static ignition of combustible vapors, dust, or solvents. A key component in any static control program, Staticide® Heavy Duty is non-toxic, non-flammable, and non-staining. When properly used and applied, Staticide® can be considered and classified as low charging according to the low charging packaging material properties described in ANSI\/ESD S541-2019 when tested according to ESD ADV11.21.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for porous surfaces\u003c\/li\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than 2 seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10^9 - 10^10 ohms\u003c\/li\u003e\n\u003cli\u003eCovers approximately 2000 sq.ft. per gallon\u003c\/li\u003e\n\u003cli\u003eLasts from weeks to months depending on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046471462,"sku":"2002-2","price":1895.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-2002-5-heavy-duty-anti-static-5-gallon-pail-2962719.png?v=1775074335"},{"product_id":"staticide®-2002-5-heavy-duty-anti-static-5-gallon-pail","title":"ACL Staticide® 2002-5 Heavy Duty Anti-Static, 5-gallon pail","description":"\u003ch3\u003eACL Staticide® 2002-5 Heavy Duty Anti-Static, 5-gallon pail\u003c\/h3\u003e\u003ch4\u003eEliminate Static on Carpets, Upholstery, \u0026amp; Fabrics\u003c\/h4\u003e\u003cp\u003eStaticide® Heavy Duty is an easy to use topical antistatic coating that's highly effective at eliminating static and preventing tribogeneration in industrial manufacturing and other static sensitive environments. Originally designed for porous surfaces such as carpets, upholstery, and fabrics, it's also appropriate for use in avoiding jamming or material slippage during printing, packaging, and converting. This solution can even be used as an aid to avert dangerous static ignition of combustible vapors, dust, or solvents. A key component in any static control program, Staticide® Heavy Duty is non-toxic, non-flammable, and non-staining. When properly used and applied, Staticide® can be considered and classified as low charging according to the low charging packaging material properties described in ANSI\/ESD S541-2019 when tested according to ESD ADV11.21.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for porous surfaces\u003c\/li\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than 2 seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10^9 - 10^10 ohms\u003c\/li\u003e\n\u003cli\u003eCovers approximately 2000 sq.ft. per gallon\u003c\/li\u003e\n\u003cli\u003eLasts from weeks to months depending on application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046504230,"sku":"2002-5","price":210.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-2002-5-heavy-duty-anti-static-5-gallon-pail-2962719.png?v=1775074335"},{"product_id":"staticide®-3000d-original-anti-static-concentrate-drum","title":"ACL Staticide® 3000D Original Anti-Static Concentrate Drum","description":"\u003ch3\u003eACL Staticide® 3000D Original Anti-Static Concentrate Drum\u003c\/h3\u003e\u003ch4\u003eProven effective for eliminating static\u003c\/h4\u003e\u003cp\u003eProven effective after years of use in industrial, commercial, and institutional facilities, ACL Staticide® 3000 Original Concentrate has become a trusted name in static protection and the closest thing to “static control insurance.” Once diluted, this economical and easy-to-use topical antistatic solution provides a highly effective method of static control, preventing tribogeneration and decaying static charges in under two seconds. Longer lasting than other topical antistatics, Staticide® 3000 Original Concentrate will last for weeks or months depending on application. It eliminates static electricity problems in a variety of industries including electronics, textiles, and plastics. Packaging material treated with Staticide can be classified as low charging according to ANSI\/ESD S541-2019 and ESD ADV11.21. Staticide® 3000 Original Concentrate saves shipping and storage costs and offers flexibility over dilution ratios and solvent choice.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective below 15% relative humidity\u003c\/li\u003e\n\u003cli\u003eDecays charge in less than two seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e9 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eCan be applied by spray, wipe, or dip, or in gravure, transfer roll-coating, or flexographic printing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046536998,"sku":"3000D","price":22619.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-3000q-original-anti-static-concentrate-quart-9711129.png?v=1775074335"},{"product_id":"staticide®-3000g-original-anti-static-concentrate-gallon","title":"ACL Staticide® 3000G Original Anti-Static Concentrate Gallon","description":"\u003ch3\u003eACL Staticide® 3000G Original Anti-Static Concentrate Gallon\u003c\/h3\u003e\u003ch4\u003eProven effective for eliminating static\u003c\/h4\u003e\u003cp\u003eProven effective after years of use in industrial, commercial, and institutional facilities, ACL Staticide® 3000 Original Concentrate has become a trusted name in static protection and the closest thing to “static control insurance.” Once diluted, this economical and easy-to-use topical antistatic solution provides a highly effective method of static control, preventing tribogeneration and decaying static charges in under two seconds. Longer lasting than other topical antistatics, Staticide® 3000 Original Concentrate will last for weeks or months depending on application. It eliminates static electricity problems in a variety of industries including electronics, textiles, and plastics. Packaging material treated with Staticide can be classified as low charging according to ANSI\/ESD S541-2019 and ESD ADV11.21. Staticide® 3000 Original Concentrate saves shipping and storage costs and offers flexibility over dilution ratios and solvent choice.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective below 15% relative humidity\u003c\/li\u003e\n\u003cli\u003eDecays charge in less than two seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e9 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eCan be applied by spray, wipe, or dip, or in gravure, transfer roll-coating, or flexographic printing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046569766,"sku":"3000G","price":510.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-3000q-original-anti-static-concentrate-quart-9711129.png?v=1775074335"},{"product_id":"staticide®-3000p-original-anti-static-concentrate-pail","title":"ACL Staticide® 3000P Original Anti-Static Concentrate Pail","description":"\u003ch3\u003eACL Staticide® 3000P Original Anti-Static Concentrate Pail\u003c\/h3\u003e\u003ch4\u003eProven effective for eliminating static\u003c\/h4\u003e\u003cp\u003eProven effective after years of use in industrial, commercial, and institutional facilities, ACL Staticide® 3000 Original Concentrate has become a trusted name in static protection and the closest thing to “static control insurance.” Once diluted, this economical and easy-to-use topical antistatic solution provides a highly effective method of static control, preventing tribogeneration and decaying static charges in under two seconds. Longer lasting than other topical antistatics, Staticide® 3000 Original Concentrate will last for weeks or months depending on application. It eliminates static electricity problems in a variety of industries including electronics, textiles, and plastics. Packaging material treated with Staticide can be classified as low charging according to ANSI\/ESD S541-2019 and ESD ADV11.21. Staticide® 3000 Original Concentrate saves shipping and storage costs and offers flexibility over dilution ratios and solvent choice.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective below 15% relative humidity\u003c\/li\u003e\n\u003cli\u003eDecays charge in less than two seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e9 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eCan be applied by spray, wipe, or dip, or in gravure, transfer roll-coating, or flexographic printing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046602534,"sku":"3000P","price":2466.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-3000q-original-anti-static-concentrate-quart-9711129.png?v=1775074335"},{"product_id":"staticide®-3000q-original-anti-static-concentrate-quart","title":"ACL Staticide® 3000Q Original Anti-Static Concentrate Quart","description":"\u003ch3\u003eACL Staticide® 3000Q Original Anti-Static Concentrate Quart\u003c\/h3\u003e\u003ch4\u003eProven effective for eliminating static\u003c\/h4\u003e\u003cp\u003eProven effective after years of use in industrial, commercial, and institutional facilities, ACL Staticide® 3000 Original Concentrate has become a trusted name in static protection and the closest thing to “static control insurance.” Once diluted, this economical and easy-to-use topical antistatic solution provides a highly effective method of static control, preventing tribogeneration and decaying static charges in under two seconds. Longer lasting than other topical antistatics, Staticide® 3000 Original Concentrate will last for weeks or months depending on application. It eliminates static electricity problems in a variety of industries including electronics, textiles, and plastics. Packaging material treated with Staticide can be classified as low charging according to ANSI\/ESD S541-2019 and ESD ADV11.21. Staticide® 3000 Original Concentrate saves shipping and storage costs and offers flexibility over dilution ratios and solvent choice.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective below 15% relative humidity\u003c\/li\u003e\n\u003cli\u003eDecays charge in less than two seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e9 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eCan be applied by spray, wipe, or dip, or in gravure, transfer roll-coating, or flexographic printing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046635302,"sku":"3000Q","price":153.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-3000q-original-anti-static-concentrate-quart-9711129.png?v=1775074335"},{"product_id":"staticide®-3030d-anti-static-concentrate-drum","title":"ACL Staticide® 3030D Anti-Static Concentrate Drum","description":"\u003ch3\u003eACL Staticide® 3030D Anti-Static Concentrate Drum\u003c\/h3\u003e\u003ch4\u003eNon-flammable, chloride- and nitrate-free\u003c\/h4\u003e\u003cp\u003eStaticide® 3030 Concentrate provides the same long-lasting static protection as Staticide® 3000 Original Concentrate, but in a non-flammable formula with superior wetting properties. Staticide® 3030 Concentrate is ideal to use in the manufacture of shielding bags because it contains no contaminants like chlorides, nitrates, or silicone. The formula does not include substances on the REACH SvHC list or in the RoHS Directive 2002\/95\/EC. Once diluted, this product can be applied in a variety of ways. It can be used to wipe non-porous surfaces, spray textiles, roll-coat plastic film, or sprayed in high production applications. Staticide® 3030 Concentrate saves freight, handling, and storage costs for high production facilities while offering greater flexibility in dilution.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than two seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e8 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eNo chlorides, nitrates, or silicones\u003c\/li\u003e\n\u003cli\u003eNon-flammable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046668070,"sku":"3030D","price":23240.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-3030q-anti-static-concentrate-quart-3476209.jpg?v=1775074333"},{"product_id":"staticide®-3030g-anti-static-concentrate-gallon","title":"ACL Staticide® 3030G Anti-Static Concentrate Gallon","description":"\u003ch3\u003eACL Staticide® 3030G Anti-Static Concentrate Gallon\u003c\/h3\u003e\u003ch4\u003eNon-flammable, chloride- and nitrate-free\u003c\/h4\u003e\u003cp\u003eStaticide® 3030 Concentrate provides the same long-lasting static protection as Staticide® 3000 Original Concentrate, but in a non-flammable formula with superior wetting properties. Staticide® 3030 Concentrate is ideal to use in the manufacture of shielding bags because it contains no contaminants like chlorides, nitrates, or silicone. The formula does not include substances on the REACH SvHC list or in the RoHS Directive 2002\/95\/EC. Once diluted, this product can be applied in a variety of ways. It can be used to wipe non-porous surfaces, spray textiles, roll-coat plastic film, or sprayed in high production applications. Staticide® 3030 Concentrate saves freight, handling, and storage costs for high production facilities while offering greater flexibility in dilution.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than two seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e8 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eNo chlorides, nitrates, or silicones\u003c\/li\u003e\n\u003cli\u003eNon-flammable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046700838,"sku":"3030G","price":530.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-3030q-anti-static-concentrate-quart-3476209.jpg?v=1775074333"},{"product_id":"staticide®-3030p-anti-static-concentrate-pail","title":"ACL Staticide® 3030P Anti-Static Concentrate Pail","description":"\u003ch3\u003eACL Staticide® 3030P Anti-Static Concentrate Pail\u003c\/h3\u003e\u003ch4\u003eNon-flammable, chloride- and nitrate-free\u003c\/h4\u003e\u003cp\u003eStaticide® 3030 Concentrate provides the same long-lasting static protection as Staticide® 3000 Original Concentrate, but in a non-flammable formula with superior wetting properties. Staticide® 3030 Concentrate is ideal to use in the manufacture of shielding bags because it contains no contaminants like chlorides, nitrates, or silicone. The formula does not include substances on the REACH SvHC list or in the RoHS Directive 2002\/95\/EC. Once diluted, this product can be applied in a variety of ways. It can be used to wipe non-porous surfaces, spray textiles, roll-coat plastic film, or sprayed in high production applications. Staticide® 3030 Concentrate saves freight, handling, and storage costs for high production facilities while offering greater flexibility in dilution.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than two seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e8 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eNo chlorides, nitrates, or silicones\u003c\/li\u003e\n\u003cli\u003eNon-flammable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046733606,"sku":"3030P","price":2517.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-3030q-anti-static-concentrate-quart-3476209.jpg?v=1775074333"},{"product_id":"staticide®-3030q-anti-static-concentrate-quart","title":"ACL Staticide® 3030Q Anti-Static Concentrate Quart","description":"\u003ch3\u003eACL Staticide® 3030Q Anti-Static Concentrate Quart\u003c\/h3\u003e\u003ch4\u003eNon-flammable, chloride- and nitrate-free\u003c\/h4\u003e\u003cp\u003eStaticide® 3030 Concentrate provides the same long-lasting static protection as Staticide® 3000 Original Concentrate, but in a non-flammable formula with superior wetting properties. Staticide® 3030 Concentrate is ideal to use in the manufacture of shielding bags because it contains no contaminants like chlorides, nitrates, or silicone. The formula does not include substances on the REACH SvHC list or in the RoHS Directive 2002\/95\/EC. Once diluted, this product can be applied in a variety of ways. It can be used to wipe non-porous surfaces, spray textiles, roll-coat plastic film, or sprayed in high production applications. Staticide® 3030 Concentrate saves freight, handling, and storage costs for high production facilities while offering greater flexibility in dilution.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria\u003c\/li\u003e\n\u003cli\u003eMeets requirements for topical anti-stats as listed in DOD-HDBK-263\u003c\/li\u003e\n\u003cli\u003eProven effective in relative humidity below 15%\u003c\/li\u003e\n\u003cli\u003eDecays static in less than two seconds\u003c\/li\u003e\n\u003cli\u003eSurface resistance between 10e8 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eNo chlorides, nitrates, or silicones\u003c\/li\u003e\n\u003cli\u003eNon-flammable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046766374,"sku":"3030Q","price":159.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-3030q-anti-static-concentrate-quart-3476209.jpg?v=1775074333"},{"product_id":"staticide®-306k-two-point-resistance-meter-with-checker-board","title":"ACL Staticide® 306K Two-Point Resistance Meter with Checker Board","description":"\u003ch3\u003eACL Staticide® 306K Two-Point Resistance Meter with Checker Board\u003c\/h3\u003e\u003ch4\u003eIdeal for ESD Packaging\u003c\/h4\u003e\u003cp\u003eThe Staticide® 306 Dual Point Resistance Meter offers an economical, all-in-one solution for resistance readings in small areas. Portable and lightweight, this meter is perfect for assurance checks, testing nooks and recesses, or anywhere too small for five-pound electrodes. The metal spring-loaded pogo pins may be used with or without conductive rubber boots. The logarithmic LED scale is quick and easy to read and evaluate. Conduct regular calibration checks using the Staticide® 307 Checker Board, equipped with logarithmically scaled 1% resistors for each decade on the meter. The testing pads are designed with the correct spacing to accommodate the meter's pogo pins. Every board is serial numbered and calibrated.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConveniently measure point-to-point resistance in a pen-sized device\u003c\/li\u003e\n\u003cli\u003eConforms to ANSI\/ESD STM11.13\u003c\/li\u003e\n\u003cli\u003eMeasures areas 0.375 inches (9.525mm) wide\u003c\/li\u003e\n\u003cli\u003eMeasurements over 10e10 ohms illuminates insulative light\u003c\/li\u003e\n\u003cli\u003eMeasuring range 10e3 - 10e10 ohms\u003c\/li\u003e\n\u003cli\u003eSpring loaded electrodes with conductive rubber boots\u003c\/li\u003e\n\u003cli\u003eColor LED display segments\u003c\/li\u003e\n\u003cli\u003eUse for resistance testing in small specimens, parts, and hard to reach place\u003c\/li\u003e\n\u003cli\u003eDimensions: Meter - 2.8” x 5.1” x 1.4”, Checker - 5” x 3.25” x 0.19”\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL Staticide","offers":[{"title":"Default Title","offer_id":52900046799142,"sku":"306K","price":858.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8761\/3222\/files\/acl-staticide-306k-two-point-resistance-meter-with-checker-board-7695870.png?v=1775074332"}],"url":"https:\/\/kem-tron.com\/collections\/anti-static-coatings-and-sprays.oembed","provider":"KEM-TRON INC.","version":"1.0","type":"link"}